FILTER BY

  1. Reset Filter

The following products were found.

SG200 Series

SG200 is a high performance Metacrylate adhesive with a balance of strength and toughness for bonding a wide range of thermoset composites and thermoplastics.

FEATURES

  • Excellent choice for bonding FRP composites, Gel coated surfaced and thermoplastics with little or no surface preparation
  • Outstanding sag resistance
  • Excellent fatigue, impact and shock load resistance
  • Outstanding environmental and chemical resistance
  • Bonds a range of substrates: Acrylic, PVC, ABS, Coated Metals, Thermoset Composites (Vinylester, Polyester, Gelcoats, and Epoxy) and other Thermoplastics
  • All metals require a primer
  • Choice of working times
  • MMA based 10:1 ratio product

SG200 Series Product Series

PRODUCT MIXED COLOR WT SIZES SDS
SG200-10 Off White 8 - 12 mins

5 gal
50 gal
490 ml cart

COMP A
COMP B

SG200-20 Off White 17 - 22 mins

5 gal

50 gal
490 ml cart

COMP A
COMP B

SG200-40 Off White 35 - 45 mins

5 gal
50 gal
490 ml cart

COMP A
COMP B

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life
SG600 Series

SG600 is a high performance adhesive with a combination of high tensile strength, high modulus and elongation for bonding a range of thermoplastics and thermoset composites.

FEATURES

  • Excellent choice doe a range of product assembly requirements including thermoplastic bonding
  • Permanent toughness and high elongation
  • Outstanding environmental and chemical resistance
  • Bonds a range of substrates: Acrylic, PVC, ABS, Coated Metals, Thermoset Composites (Vinylester, Polyester, Gelcoats, and Epoxy) and other Thermoplastics
  • All metals require a primer
  • Choice of working times
  • MMA based 10:1 ratio product

SG600 Series Product Series

PRODUCT MIXED COLOR WT SIZES SDS
SG600-05 Black or Off White 4-6 mins

5 gal
50 gal
490 ml cart

COMP A
COMP B BLACK
COMP B OFF WHITE

SG600-10 Black 8-12 mins

5 gal

50 gal
490 ml cart

COMP A
COMP B BLACK

SG600-20 Black or Off White 15-20 mins

5 gal
50 gal
490 ml cart

COMP A
COMP B OFF WHITE

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life
SG5000 Series

SG5000 is a high strength, fast curing, two-part structural adhesive system.

FEATURES

  • High viscosity, non-sag application
  • Fast cure system
  • Excellent tensile and impact strength
  • Primerless metal bonding for most metals
  • Excellent environmental and chemical resistance
  • Minimal surface preparation
  • Choice of working times
  • MMA based 1:1 mix ratio

SG5000 Series Product Series

PRODUCT MIXED COLOR WT SIZES SDS
SG5000-03 Black or Off White 2-5 mins

5 gal
50 gal
50 ml cart
400 ml cart

CART UK
BULK UK

SG5000-06 Black or Off White 5-8 mins

5 gal
50 gal
50 ml cart
400 ml cart

CART UK
BULK UK
BULK US

SG5000-13 Black or Off White 5-8 mins

5 gal

50 gal
50 ml cart
400 ml cart

CART UK
BULK UK

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life
SCIGRIP MP100

MP100 is a surface treatment that is designed to clean, chemically convert and prepare stainless steel and aluminium surfaces for permanent bonding.

FEATURES

  • Simple brush or wipe application
  • Rapid dry
  • Mild solvent action
  • Aggressive etching and chemical conversion
  • Cleans metal surface prior to conversion
  • Reduces surface corrosion and chemically links adhesive to metal surface
  • Simplifies application, facilitates visual inspection

SCIGRIP MP100 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
MP100 Red 5-10 mins

pint bottle

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SG100 Series

SG100 is a bright white, high performance adhesive with a combination of high tensile strength, high modulus and elongation for bonding a range of primed metals, composites and composites with gelcoat finishes as well as thermoplastics.

FEATURES

  • UV stabilized, bright white color for color critical applications
  • Excellent choice for bonding FRP composites, gel coated surfaces and thermoplastics with little or no surface preparation
  • Outstanding fatigue, impact and shock load resistance
  • Excellent environmental and chemical resistance
  • Bonds range of substrates: Acrylic, PVC, ABS, Thermoset Composites (Vinylester, Polyester, Gelcoats, and Epoxy), Primed Metals, Coated Metals, and other Thermoplastics
  • All metals require a primer
  • Choice of working times
  • MMA based 10:1 ratio product

SG100 Series Product Series

PRODUCT MIXED COLOR WT SIZES SDS
SG100-15 White 12-18 mins

490ml cart
5 gal
50 gal

COMP A
COMP B

SG100-40 White 35-45 minutes

490ml cart
5 gal
50 gal

COMP A
COMP B

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 1707

1707 is a medium bodied fast setting cement for bonding ABS only.

FEATURES

  • Fast setting times
  • Specific for bonding ABS

SCIGRIP 1707 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
1707 Milky See Product Bulletin

Pint (#10486)
Gallon (#10484)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 2354

2354 is a water thin, fast setting cement for bonding ABS and styrene to themselves.  Not to be used for joining dissimilar materials

FEATURES

  • Low viscosity
  • Fast setting times
  • Specific for bonding ABS and styrene to themselves

SCIGRIP 2354 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
2354 Clear See Product Bulletin

Pint (#10491)
Gallon (#10490)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 4707

4707 is a low VOC version of the popular 1707 assembly adhesive. It is fast to set and specially developed for bonding ABS.

FEATURES

  • Low VOC content
  • Fast setting times
  • Specific for bonding ABS

SCIGRIP 4707 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
4707 Milky See Product Bulletin

Pint (#11129)
Gallon (#11128)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 3061

Scigrip 3061 is a thinner for Scigrip 40 acrylic cement - Component A (acrylic monomer).

FEATURES

SCIGRIP 3061 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
3061 Coming Soon Coming Soon

Pint (#11283)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 1802

1802 is a light bodied, medium setting cement for bonding acrylic, ABS, cellulose acetate butyrate (CAB), rigid PVC and polystyrene to themselves and each other.

This product may be used in SCAQMD in the manufacturing of orthotics and medical devices only

FEATURES

  • Forms strong, waterproof and clear bonds.

SCIGRIP 1802 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
1802 Clear See Product Bulletin

Pint (#10351)
Gal (#10350)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 11

11 is a white, low VOC emission, thick syrupy, two-component, high strength reactive adhesive.  It is specially formulated for bonding large diameter PVC and CPVC pipe and fittings. It also bonds ABS, Styrene, Acrylic, FRP (fiberglass reinforced polyester), aluminum (non-anodized), other metals, concrete, clay and other materials to themselves or to dissimilar materials. It is great for repairing cracks or leaky pipe valves and fittings. SCIGRIP 11 has excellent gap-filling property and is ideal for fabricating fittings and joining saddles to pipe.

FEATURES

  • Fast cure time
  • Low VOC content
  • Convenient dual cylinder cartridge (10:1 ratio)
  • Bonds withstand high pressure and impact loads
  • Good gap filling properties

SCIGRIP 11 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
11 White See Product Bulletin

470 ml Cart (#10985)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 10

Scigrip 10 is a two-component, high strength, high viscosity structural adhesive for bonding PVC, acrylic, ABS, and polycarbonate.

FEATURES

  • Low VOC content
  • High strength
  • High viscosity

SCIGRIP 10 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
10 White See Product Bulletin

4 oz. (#10182)
Pint (#10181)
Gal (#10179)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 40

Scigrip 40 is a two-component, reactive, high strength adhesive for bonding and fabricating all acrylics (extruded, cast, and cross linked) to each other. It will also bond acrylic to polyester, butyrate, PVC, ABS, PETG, etc. Can also be diluted with 3061™ thinner. Meets Mil Spec A-8576C Type lll.

FEATURES

  • Low VOC content
  • High strength
  • Mil Spec A-8576C Type III.

SCIGRIP 40 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
40 Clear See Product Bulletin

4 oz. (#11267)
Pint (#11266)
Gal (#11265)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 28

Scigrip 28 is a three-component, reactive, high strength acrylic based adhesive for bonding all acrylics, including cell cast, continuous cast, extruded, and cross-linked acrylic and molded parts. It will also bond acrylics to polyester (PET), cellulose acetate butyrate (CAB), polystyrene, wood, and other materials. 28 has good weather resistance and meets Mil Spec A-8576C Type II.

FEATURES

  • Low VOC content
  • High strength
  • Mil Spec A-8576C Type II.

SCIGRIP 28 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
28 Clear See Product Bulletin

Pint (#11780)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 16

Scigrip 16 is a medium bodied, fast-setting, high strength acrylic cement. It also bonds rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.

FEATURES

  • Fast setting
  • High strength

SCIGRIP 16 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
16 Clear See Product Bulletin

1.5 oz. (#10319)
5 oz. (#10315)
Pint (#10314)
Gal (#10313)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 4

Scigrip 4 is a water thin, somewhat flammable, moderately fast-setting, blush-resistant solvent cement for bonding acrylic. It will also bond with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), and polycarbonate to themselves. It will not bond to cross-linked acrylic.

FEATURES

  • Very low viscosity – water thin

SCIGRIP 4 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
4 Clear See Product Bulletin

4 oz. (#10308)
Pint (#10307)
Quart (#12755)
Gal (#10306}

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 3

Scigrip 3 is a water thin, non-flammable, very fast-setting solvent cement for bonding acrylic. It will also bond with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate to themselves. It will not bond to cross linked acrylics.

FEATURES

  • Very low viscosity – water thin
  • Very fast setting
  • Non-flammable

SCIGRIP 3 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
3 Clear See Product Bulletin

4 oz. (#10799)
Pint (#10300)
Quart (#12754)
Gal (#10299)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 57

This multi-purpose plastics cleaner is suitable for use on acrylics, polycarbonate, butyrate, vinyl, ABS, Styrene etc.

FEATURES

  • Non-abrasive surface cleaning

SCIGRIP 57 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
57 Clear See Product Bulletin

Gal (#11273)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

SCIGRIP A061

A061 surface cleaner/degreaser is a quick drying spray applied surface conditioning agent for improved adhesion.  It is fast acting and will penetrate and dissolve oils and greases without leaving residues on the bonding surface.

FEATURES

  • Penetrates and dissolves oils and greases
  • Dries fast without residues
  • Surface conditioning agent for improved adhesion
  • Non-chlorinated blend of solvents.

SCIGRIP A061 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
A061 Clear N/A

200 ml 

Pump Spray

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

SCIGRIP A113

Activator A113 is a medium or fast activity spray that accelerates the cure of all Cyanoacrylate grades.  This product helps form bonds on wood and porous surfaces and can assist with bonding on leather and fabrics.

FEATURES

  • Non-Yellowing
  • Low bloom
  • High Speed

SCIGRIP A113 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
A113 Clear N/A

200 ml Aerosol
200 ml Pump
1 Ltr Tin
5 Ltr Tin

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

SCIGRIP A471

A471 Anaerobic Activator is designed to speed up the cure of anaerobic compounds and is suited to use with passive or inert materials. A471 is also used for structural applications with ST3319 adhesive.

FEATURES

  • Speeds up cure of Anaerobic compounds
  • Ideal for large gaps and inactive materials

SCIGRIP A471 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
A471 Clear N/A

50 ml Pump Spray

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

SCIGRIP A649

Activator A649 is used in applications where an anaerobic adhesive needs a fast cure speed or, in the case of a structural adhesive, A649 will give fast activity on metal parts and assist in achieving full cure within hours.

FEATURES

  • Improves speed on passive surfaces
  • Can be used single or double sided
  • Activates certain structural adhesives

SCIGRIP A649 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
A649 Turquoise <30 secs

1 Ltr Tin

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

SCIGRIP A701

A701 surface primer is used in combination with CA-4061 or other Cyanoacrylates to promote adhesion on low energy surfaces such as Polyethylene, Polypropylene, Silicone rubber and certain hard to bond materials such as Telelon, EPDM and Vitons etc.

FEATURES

  • Reduced Odour
  • Ultra-High Strength
  • Cure Speed with CA4061 5 - 10 seconds

SCIGRIP A701 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
A701 Clear N/A

50ml Pump Spray

1 Ltr Tin

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

CA01

CA01 is a high viscosity ethyl based Cyanoacrylate for bonding where gap fill is important, or where the materials are absorbent surfaces such as wood, paper and some fabrics. CA01 is versatile and will bond most plastics, rubbers and metals. Because of its high viscosity CA01 allows additional bonding time prior to cure.

FEATURES

  • High viscosity
  • Slower cure allows repositioning
  • Bonds absorbent surfaces

CA01 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA01 Clear <30 Secs, <5 secs with activator A113

20g Bottle
50g Bottle
500g Bottle
20Kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

CA25

CA25 Instant Adhesive is an Ethyl based cyanoacrylate which bonds almost immediately on contact. CA25 is a general purpose superglue designed to bond most metals, plastics, elastomers and will bond ceramics, wood and textiles among others. Cure times vary according to the materials, usually between 30 – 45 seconds but can be instant when used with activator A113

FEATURES

  • Instant cure with activator A113
  • Ideal general purpose grade
  • Low Viscosity

CA25 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA25 Clear <45 seconds, instant with activator A113

20g Bot
50g Bot
500g Bot
10g Pen App
20Kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

CA25

CA25 Instant Adhesive is an Ethyl based cyanoacrylate which bonds almost immediately on contact. CA25 is a general purpose superglue designed to bond most metals, plastics, elastomers and will bond ceramics, wood and textiles among others. Cure times vary according to the materials, usually between 30 – 45 seconds but can be instant when used activator A113.

FEATURES

  • Instant cure with activator A113  
  • Ideal general purpose grade
  • Low Viscosity

CA25 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA25 pen Clear <45 secs, instant with activator A113

Pen Applicator

 
WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

CA4061

CA4061 Bonding Kit consists of the premium grade CA4061 cyanoacrylate adhesive and a 50ml pump activated surface primer A701. Together they make up an extremely fast setting combination specifically formulated for all types of rubber bonding and when used together will successfully bond low energy surfaces such as Polypropylene and Polyethylene.

FEATURES

  • Low Viscosity
  • Very fast setting
  • Substrate failure on rubbers and plastics
  • High strength bonds to metals

CA4061 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA4061 Clear Instant with A701 Primer

Kit with A701 Primer

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

CA4061

CA4061 has superior cure speeds and ultimate cured strength compared to most other Low Viscosity Cyanoacrylates. It has the ability to bond a wide range of difficult plastics and elastomers including: Nitrile, Neoprene and natural rubbers (1-2 seconds); ABS, soft PVC, Polyacetal, EPT and EVA Steel, Aluminium.

FEATURES

  • Low Viscosity
  • Very fast setting
  • Substrate failure on rubbers and plastics
  • High strength bonds to metals

CA4061 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA4061 Clear Instant with A701 Primer

20g Bot
500g Bot
20kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

CA41

CA41 is a Hybrid quality Cyanoacrylate which is surface insensitive and bonds to a wide variety of materials including wood, paper, cardboard, leather, fabrics etc. Bond times vary according to the substrates but are generally faster than normal superglues.

FEATURES

  • Surface Insensitive
  • Medium viscosity
  • Bonds to most surfaces
  • Rapid setting 

CA41 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA41 Clear <30 secs, instant with activator A113

20g Bot
50g Bot
500g Bot
20kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

CA431

CA431 is a high viscosity, surface insensitive hybrid cyanoacrylate for bonding wood, paper, card, leather and fabrics and plastics.

FEATURES

  • High Viscosity
  • Surface Insensitive

CA431 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA431 Clear 20 - 40 seconds, <10 seconds with activator A113

500GM Bot

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE ONLY.

For USA enquiries please contact us.

CA44

CA44 is a thixotropic Gel superglue. It is a non-drip formulation and will not run on vertical surfaces. It is fast to set on difficult surfaces such as leather and acetic substrates.

FEATURES

  • Thixotropic Gel
  • Non Drip
  • Slower cure allows repositioning
  • Use with A113 Activator when faster cure or fillet bond is required

CA44 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA44 Clear <35 Secs, <10 secs with activator A113

20g Tube

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

CA60

CA60 is a is a low viscosity cyanoacrylate for rapid bonding of plastics, rubbers and elastomers, and Its low viscosity will wick between pre-assembled parts.

FEATURES

  • Surface Insensitive
  • Extremely Strong
  • Low Viscosity
  • Very fast curing

CA60 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
CA60 Clear <10 Secs, instant with activator A113

20g Bot
50g Bot
500g Bot
20kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 55

SCIGRIP 55 is a light bodied, fast setting, versatile solvent cement for bonding flexible or rigid vinyl to itself or to urethane, leather, canvas, ABS, foamed PVC, butyrate, and wood. It bonds quickly upon contact with substrates and the bond strength will increase as solvent dissipates.

FEATURES

  • VOC free – No volatile organic compounds
  • Recommended for a variety of applications in the sign assembly industry
  • Excellent resistance to discoloration by UV light
  • Outstanding lap shear and impact strength

SCIGRIP 55 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
55 Clear See product bulletin

50ml Cart (# 11272)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 58

SCIGRIP 58 is a VOC-free, two-component, fast-setting, reactive, urethane-based adhesive for bonding polycarbonate, butyrate, ABS, and PETG to themselves and each other. Excellent UV light resistance.

FEATURES

  • VOC free – No volatile organic compounds
  • Fast curing, clear colorless, two-component, 100% reactive polyurethane adhesive
  • Recommended for a variety of applications in the sign assembly industry
  • Excellent resistance to discoloration by UV light
  • Outstanding lap shear and impact strength

SCIGRIP 58 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
58 Clear See product bulletin

50ml Cart (#12373)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 4807

4807 is a medium bodied, fast setting cement for joining styrene to itself.

FEATURES

  • Suitable for a wide variety of applications
  • Fast drying solvent type cement
  • High strength rigid bond
  • Can be used on both large and small assemblies, large displays, signs, lighting fixtures, housewares, large and small containers, toys, electrical or electronic assemblies, decorator items etc.

Note: All bottles and bottle tubes utilize transparent applicator nozzles with white screw on cap.

SCIGRIP 4807 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
4807 Milky 10-15 mins

Gal (#11131)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

UV 106

UV 106 is a flexible, thixotropic, UV cure adhesive, particularly suited to bonding plastics including polycarbonate, acrylic, and rigid or flexible PVC. Produces flexible bonds to glass and metals.

FEATURES

  • Plastic compatible UV/light cure
  • Non yellowing
  • Exceptional speeds
  • Flexible
  • Bonds polycarbonate, acrylic UV/ High intensity
  • Visible Light of good intensity cure system

UV 106 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
UV 106 Clear

50ml Bot
250ml Bot
1kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

UV 110

UV 110 is a low viscosity structural bonding UV curable adhesive, designed to bond glass to glass, and glass to metals. Providing a degree of flexibility and toughness to resist shock and give ultimate bond strength.

FEATURES

  • Tough structural bond
  • Low viscosity
  • Glass to glass
  • Glass to stainless steel
  • Glass to aluminum

UV 110 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
UV 110 Clear

50ml Bot
250ml Bot
1kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

UV 150

UV 150 is a medium viscosity, non-yellowing, clear UV curable adhesive primarily designed for glass bonding, although it will bond glass to a variety of metals and other materials. This product is also suitable as a medium viscosity (MV) bevel bonder.

FEATURES

  • Non yellowing clear bond
  • Glass to Glass/Metals
  • Medium Viscosity

UV 150 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
UV 150 Clear

50ml Bot
250ml Bot
1kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN EUROPE & ASIA ONLY.

For USA enquiries please contact us.

UV 188

UV 188 is a high viscosity structural bonding UV curable adhesive, designed to bond glass to glass, and glass to metals with a degree of flexibility and toughness to resist shock and give ultimate bond strength.

FEATURES

  • High Viscosity
  • Tough structural bonds
  • Glass to glass/metals

UV 188 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
UV 188 Clear

50ml Bot
250ml Bot
1kg Bulk

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 4909

A medium-bodied, fast-setting cement for bonding flexible vinyl to itself or other plastics. It can also be adhered to a selection of porous materials including wood, canvas or leather.

FEATURES

  • Low VOC
  • Water Resistant
  • Fast setting

SCIGRIP 4909 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
4909 Clear See product bulletin

Pint (#11135)
Gal (#11134)

 
WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 4784 is a low VOC emission, clear, thin to medium bodied solvent cement. It cures rapidly with the dissipation of the solvent at room temperature which results in a very strong but flexible bond.

SCIGRIP 4784 is formulated to bond flexible vinyl to itself or a variety of other thermoplastics such as cellulose acetate butyrate, rigid PVC, acrylic, Kydex® and porous materials such as wood and fabrics.

FEATURES

  • Low VOC
  • Weather and water resistant
  • Bonds have similar physical and chemical properties to acrylic plastic

SCIGRIP 4784 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
4784 Clear See product bulletin

1.5oz (#13179)
Pint (#13178)
Gal (#13177)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 4052

SCIGRIP 4052 is a clear, medium bodied, fast set solvent cement. It is formulated for bonding a variety of plastic substrates including; PVC, CPVC, foamed PVC, ABS, acrylic, styrene, polycarbonate, Noryl, to themselves and each other.

When viewed in the container, the product has a slight amber tint however on application the substrate dries clear.

FEATURES

  • Bonds a variety of plastic substrates
  • Fast set
  • Low VOC

SCIGRIP 4052 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
4052 Amber See product bulletin

Pint (#11138)
Gallon (#11137)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 4007

Clear, high strength cement for rigid and foamed PVC. SCIGRIP 4007 can be used on both large and small assemblies, large displays, signs, lighting fixtures, housewares, large and small containers, toys, electrical or electronic assemblies and decorator items.

FEATURES

  • Very fast curing
  • Suitable for a wide variety of applications
  • Weather resistant
  • Low VOC

SCIGRIP 4007 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
4007 Clear See product bulletin

Gal (#11125)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 2007

SCIGRIP 2007 is a water thin, very fast-setting solvent cement for bonding PVC, and foamed PVC® to themselves and to each other. It is suitable and used on both large assemblies and small delicate assemblies.

FEATURES

  • Very fast setting solvent cement for bonding PVC to themselves and to each other
  • Suitable for a wide variety of applications from both large assembles and small delicate assemblies
  • Recommend where a water-thin cement is desired

SCIGRIP 2007 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
2007 Clear See product bulletin

Pint (#10448)
Gal (#10447)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 1910

SCIGRIP 1910 is a clear, medium bodied, high strength solvent cement. It cures rapidly with the dissipation of the solvent at room temperature resulting in a very strong, flexible, water resistant bond. Indications are that service life for a number of years may be expected under normal use, but some yellowing may be expected.

FEATURES

  • High strength cement
  • Bonds a range of substrates: Flexible vinyl to itself, flexible to rigid vinyl, ABS acrylic, wood, canvas and other porous materials
  • Can also be used to repair vinyl seats in buses, patch vinyl waterbeds etc.

SCIGRIP 1910 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
1910 Clear See product bulletin

Gallon (#10437)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 1909

SCIGRIP 1909 is a clear, medium bodied, high strength solvent cement. It cures rapidly with the dissipation of the solvent at room temperature resulting in a very strong, flexible, water resistant bond. Indications are that service life for a number of years may be expected under normal use, but some yellowing may be expected.

FEATURES

  • High strength cement
  • Bonds a range of substrates: Flexible vinyl to itself, flexible to rigid vinyl, ABS acrylic, wood, canvas and other porous materials
  • Can also be used to repair vinyl seats in buses, patch vinyl waterbeds etc.

SCIGRIP 1909 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
1909 Clear See product bulletin

Gallon (#10431)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 1829

SCIGRIP 1829 is a medium-bodied, general purpose, elastomer-based adhesive for bonding a wide variety of plastic and non-plastic materials to themselves and to each other (e.g. acrylics, canvas, flexible and rigid vinyl, glass, metal, urethane foam, wood, etc.) Also bonds some synthetic rubber.

FEATURES

  • General purpose adhesive
  • Bonds a range of substrates: flexible and rigid vinyl;s, acrylics, urethane foam and others to wood, metal, glass, masonry, canvas, rubber and other non-plastics
  • Excellent water, oil and gasoline resistant
  • Outstanding impact resistance

SCIGRIP 1829 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
1829 Tan See product bulletin

4oz (#10554)
Gal (#10552)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 1001

SCIGRIP 1001 is a light-bodied, slow setting cement for bonding flexible or rigid vinyl, foamed PVC, ABS, acrylic, and non-plastics to themselves and each other. Useful for bonding rigid or semi-rigid vinyl materials.

FEATURES

  • Low VOC
  • Bonds a range of substrates: vinyl, rigid PVC, foamed PVC, ABS, and non-plastics to themselves and each other. Nb. It does not bond styrene, butyrate, polyolefin's, or PTFE
  • Excellent water resistance
  • Recommended in building and industrial applications involving rigid or semi-rigid materials, such as vinyl extrusions

SCIGRIP 1001 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
1001 Clear See product bulletin

Gal (#10419)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life

PRODUCT CURRENTLY AVAILABLE IN AMERICAS ONLY.

For European enquiries please contact us.

SCIGRIP 66

SCIGRIP 66 is a light bodied, fast setting, versatile solvent cement for bonding flexible or rigid vinyl to itself or to urethane, leather, canvas, ABS, foamed PVC, butyrate, and wood. It bonds quickly upon contact with substrates and the bond strength will increase as solvent dissipates.

FEATURES

  • Low VOC
  • Light bodied, fast drying solvent cement
  • High strength, long lasting, water resistant bonds
  • Bonds a range of substrates: Flexible or rigid vinyl (PVC) to itself or to urethane, canvas, ABS, foamed PVC, butyrate and wood

SCIGRIP 66 Product Series

PRODUCT MIXED COLOR WT SIZES SDS
66 Clear See product bulletin

Pint (#10462)
Gal (#10461)

SDS

WT - Working Time|Cart - Cartridge|Comp - Component
TFT - Tack Free Time|SL - Shelf Life
BACK TO TOP

SCIGRIP Americas

600 Ellis Road
Durham, NC 27703
USA
Tel: +1 919 598 2400
Fax: +1 919 598 2439
Email: info@scigrip-americas.com

SCIGRIP Europe

Unit 22, Bentall Business Park,
Glover Road, Washington,
Tyne and Wear, NE37 3JD
UK
Tel: +44 0 191 419 6444
Fax: +44 0 191 419 6445
Email: info@scigrip-europe.com

SCIGRIP Assembly Adhesives

500 Distribution Parkway
Collierville, TN 38017
Tel: +1 901 853 5001
Fax: +1 901 853 5008
Customer Service: +1 800 888 8312
Technical Service:
+1 877 477 8327
+1 310 898 3304

  1. Connect With Us On LinkedIn
  2. View Us YouTube
  3. IPS Corporation

© 100% Marketing