With over 65 years experience, SCIGRIP offers an extensive range of adhesives for bonding metals, composites and plastics.
The following products were found.
S977 is a multipurpose, highly accredited instant sealer for all types of threaded metal assemblies. Using the latest P.T.F.E sealer technology it provides high adhesion capability on various metals even at high temperatures where expansion in parts has previously been known to cause leakages.
|S977 Pipe Sealant||Yellow||20-30 mins (initial strength), 3-6 hrs (final strength)||
S974 is capable of high temperature resistance up to 180°C and is designed to produce fast sealing multi use gasketing on rigid parts assembly. The cure system incorporates an adhesion promoter which gives excellent function on a variety of metals, typically found in sealing flanges and face to face joints.
|S974||Orange||20-30 mins (initial strength), 24 hrs (final strength)||
S72 White Pipe seal is an Instant Low Pressure sealant for fine and coarse threads up to 3” in diameter. S72 is unusual in that it does not fully cure until approximately 60 hours after application. This therefore allows re-alignment of elbows and joints.
|S72||White||12- 24 mins initial strength and 60 hrs final strength||
S910 is a high viscosity paste that delivers a fast set instant seal. It can be used for sealing any shape or size of high temperature application and dressing gaskets. S910 is also suitable for the manufacture of rigid assemblies.
|S910||Red||12-16 mins (initial strength) 12 hrs (final strength)||
A thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines.
|S954||Brown||12-16 mins (initial strength), 12 hrs (final strength)||
S918 Gasket Maker is designed to fill gaps, and when fully cured it is capable of flexing to accommodate differentials of thermal expansion in dissimilar parts. S918 provides excellent adhesion to the mating surfaces during the service life of the parts.
|S918||Red||20-45 minutes (initial strength), 24 hrs (final strength)||
A fast curing silicone with reduced odour, specially formulated for applications requiring good adhesion, excellent physical and low corrosive properties. RTV854 shows little physical change in high temperatures and chemical environments.
|RTV854 Silicone||Grey||7min (23˚C & 65% R.H)||
One component moisture curing gasket sealant for high temperature applications. RTV853 replaces almost any cut gasket, resists cracking, shrinkage and migration. Can be applied to dress paper or cork pre-cut shapes.
|RTV853 Silicone||Red||15 mins||
Powercan: 200 ml
RTV855 is a general purpose silicone of high quality which when cured resists most chemicals and temperatures up to 180ºC.
|RTV855||Black or White||15-25 mins||
RTV851 Black is an RTV Silicone sealant of high performance that is low corrosivity and high temperature resistant.
600 Ellis Road
Durham, NC 27703
Tel: +1 919 598 2400
Fax: +1 919 598 2439
Unit 22, Bentall Business Park,
Glover Road, Washington,
Tyne and Wear, NE37 3JD
Tel: +44 0 191 419 6444
Fax: +44 0 191 419 6445
500 Distribution Parkway
Collierville, TN 38017
Tel: +1 901 853 5001
Fax: +1 901 853 5008
Customer Service: +1 800 888 8312
+1 877 477 8327
+1 310 898 3304